a2z MagCap No Guide Jig

The a2z MagCap No Guide Jig caps the Universal Base with a clean, flat 190mm-square work surface — the largest flat area in the a2z jig system. Use it when you need open space for irregular items, taped-down media, or freehand positioning rather than a fence.

How the a2z jig system works

This jig works with the a2z Universal Base. The system is simple: the base mounts to your laser bed once and gets centered once — that's the only alignment you ever do. After that, this jig and every other a2z insert locate to that same base and land in exactly the same spot, every time. Switch from flat stock to coins to tumblers in seconds, and the engraving files you've already dialed in keep lining up without test marks or re-framing.

1. Mount the Universal Base once. One-time setup, centered on your laser.
2. Set this jig on the base for today's job. Same base, same position, as every a2z insert.
3. Engrave with repeatable positioning. No re-alignment between jobs — ever.

Specs: 190mm square surface · mounts on top of the Universal Base

Includes:

• 1x MagCap No Guide Jig

Runs on the a2z Universal Base (shown in photos, sold separately) — add the Universal Base once and every a2z insert jig you buy after it clicks in with zero re-alignment.

Need alignment edges? See the Single Guide and Double Guide Long MagCaps.